The Phive CL-1 illuminating a book being sewn on a Nokey sewing frame.
My first workbench light was a twin tube florescent I found on the street. The long tubes illuminated very evenly, without casting shadows from my own hands while I was working. Eventually the buzz from the ballast became intolerable, and I switched to a 100 watt round swing-arm adjustable style, which most people use.
Recently, I decided to try out the Phive CL-1 LED lamp. So far it is a great light. It looks high-tech, the arm is easy to position, and more importantly stays in position. The 5000k color temperature is pretty close to daylight. The area where the LED’s are mounted is very small, so you can position it close to yourself or to your work.
The bulb does not seem to be replaceable, but the lifespan is estimated to be 50,000 hours, which is 17 years at 8 hours a day — very close to my own working lifespan.
Designer binders, conservators who replicate wooden boards with laminated museum board, and others sometimes have to create a bevel or chamfer in book board. Often this is accomplished by sanding, which is at best a very slow process, and at worst an easy way to create a disgusting amount of dust. A downdraft table and PPE is recommended.
Beveled book boards were very common in the nineteenth century. Various contraptions were invented to do this, including a specialized board shear that cut at 45, rather than a 90 degrees, a jigged foot clamp and large chefs knife, and a machine that used a woodworkers jack plane running in a track. Large production shops sometimes had a board beveling machine with a rotary blade, but most of us are not so lucky.
As the video below illustrates, it is also possible to bevel binder’s board quite efficiently with a modified 151 spokeshave, a tool which is usually used to thin leather over large areas. Note how much I skew the spokeshave, and how it is in motion when I start the cut. Also listen to the sound: this is what a properly adjusted sharp blade sounds like. Even after spokeshaving, it may still may be necessary to refine the board edge a bit with some coarse sandpaper.
If you are laminating your own boards (de rigueur for high end work), it is a good idea to paste a few layers of colored paper to the level you intend to bevel, in order to judge how deep you are spokeshaving. Since binder’s board is quite abrasive, an A2 or PM-V11 blade is a necessity. And the blades do wear more quickly than when shaving leather. It would be smart to dedicate one blade just for board.
It has been almost a decade since my first two whatsit posts, Whatsit #1 and #Whatsit #2. Number 2 was identified by Tom Conroy, #1 is still a bit of a mystery. For those unfamiliar with this colloquial American term, a “whatsit” is an unidentified object, short for “what is it”? The Mid-West Tool Collectors association often features a number of them in their quarterly publication, The Gristmill. You get a lot for your annual membership from them, including a reprint of a classic tool oriented book. The Early American Industries Association usually features a panel discussing a number of them in front of a live audience. Full bore geeky fun!
Recently a colleague has sent me images of a seriously odd, unidentified tool she found in her conservation lab. She first thought it was some kind of cloth cutting tool, but it didn’t really work. This makes sense given the conically shaped brass end of it: a cloth cutter would have to have two steel blades. The shape of the handle indicates it is used by pushing forward, but I’ve never seen anything like it.
Here is a more detailed description of the business end. “The cone is not solid. The brass sheet overlaps the wooden handle for about 1.25 in. The cone is secured on the handle with two brass “pins” (visible in the photos, 1 pin on each side) onto the handle. The blade-like part opens wider than is shown in the photo. I can move it to a 90° angle with the cone. When I open the blade fully and squint at the base of the blade, it looks as though the same pin(s) attaching the cone to the handle may also attach the blade to the handle. Maybe it’s a single pin that runs all the way through.” She later mentioned the blade opens to almost 90 degrees.
The size of the brass end seems too large for bookbinding applications, my first guess is it is a type of gardening tool called a dibber or dibble. Possibly the blade would aerate the soil or cut small roots?? It is odd how new the handle and brass cone looks when compared to the wear and discoloration on the blade.
But I’m not sure of any of this And why did it end up in an institutional book conservation lab? I’m stumped.
ADDED: Sept. 27, 2017. MYSTERY SOLVED! John Nove, coment below, and in a personal email sent me the identification. It is a Humboldt Sharpener for Cork Borers. Well done John! https://www.humboldtmfg.com/cork-borer-sharpener.html
The stamping reads ” MADE IN WEST GERMANY”This is the other side. Even the blade pivot pin is made of brass, which suggests light duty use.
